Stainless steel countertops with integrated details built to your kitchen.
Custom 304 stainless steel countertops made to exact dimensions in 16 or 14 gauge or 1/4 inch plate. Integrated sinks, backsplashes, and three press-brake edges.
Build your countertop, then send the spec.
Pick the shape and size, metal, thickness, finish, edge, backsplash, sinks and cutouts. The 3D preview updates with every choice, and you can drag it to look around. Your configuration goes out with the quote request so our shop can draw the CAD.
The rendering is a design aid, not a shop drawing. Living metal finishes are hand-applied and vary piece to piece. Final dimensions are field-verified before fabrication.
Request received
Thanks. Your configuration is with the shop and we will follow up with a quote.
Eased, marine, or flat bullnose, with an optional integrated backsplash.
Each edge is formed on the press brake to your exact dimensions. Eased is a slightly softened square edge and our standard. Marine is a raised no-drip lip formed at an angle, then straight down the front, so spills stay on the counter. Flat bullnose bends down at 45 degrees, runs straight down the face, then 45 degrees back under. Edges are 1-1/2 inches tall as standard, up to 5 inches.
Sinks can be integrated (welded in and seamless), or we cut the top for your drop-in sink or for an undermount sink with finished inside edges. An integrated backsplash is bent up from the same sheet, 4 inches standard and up to 8 inches. We also cut for cooktops, faucets, soap dispensers, air gaps, and filters.
- 14 gauge (0.075 inch) 304 stainless standard
- 16 gauge (0.060 inch) or 1/4 inch plate on request
- Integrated sinks, welded in and seamless
- Integrated backsplash bent from the same sheet (not on 1/4 inch plate)
- #4 brushed or matte finish
See it in real kitchens
Configurations and finishes
Eased edge
A slightly softened square edge. Our standard.
Marine edge
A raised no-drip lip formed on the press brake, then straight down the front.
Flat bullnose
45 degrees down, straight down the face, 45 degrees back under. No round.
Integrated backsplash
Bent up from the same sheet with a 3/4 inch return to the wall. One piece, no weld.
Integrated sink
Welded in and finished seamless. Stainless tops only.
Thickness
16 gauge, 14 gauge (standard), or 1/4 inch plate.
What our clients say
“Alex came and measured once the cabinets were in place and discussed design details. The design rendering turnaround was quick. The installation team sought feedback throughout. We are incredibly pleased with the results and the unique look.”
Common questions
Ready to talk about your stainless steel countertops?
We quote every project free. Share dimensions, material choice, and reference photos. Most quotes come back within one business day.